Welcome to our floor steam cleaners site where we will bring you unbiased and detailed reviews on the very best floor steam cleaners on the market.
What to look for in a floor & Carpet steam cleaner
All steam cleaners are designed to do the same job, that is, they are designed to lift dirt and grime while sanitizing, without the need for chemicals. A steam cleaner works by rapidly heating up water to produce steam, which is then applied to the carpet or surface at high pressure. This produces a ‘dry’ steam that manufacturers claim can bring up dirt and grease, and kill bacteria and dust mites.
But, just as a car and a bus and a plane are basically designed to get you from point-A to point-B, they still can vastly differ from one another. A floor steam cleaner is used for cleaning a wide variety of floor surfaces including but not limited to tiles, carpet, laminate, granite, marble, and concrete. Choosing the right machine and specifications can make the cleaning of any of these surfaces easy and virtually effortless. As such, the selection of a steam cleaning machine should be done only after considering the following points.
The quality of floor steam cleaners also varies. So what differences should we look for?
The pressure generated within the boiler directly affects the performance of your steam cleaner. The higher the pressure, the more powerful the cleaner. A higher bar pressure creates hotter steam which more effectively dislodges dirt and grime and kills bacteria and mould. If you have high-traffic areas, then you may need a more a powerful machine.with higher pressure levels
Size of Water Reservoirs
The length of continuous operation is important Floor steam cleaners vary in the size of the water chamber, enabling operators to refill during operation of the system. A mini-steamer or a steam-mop with a capacity of one or two cups will need to make several trips to the tap before it can clean an average family home. Full-size steam cleaners have a stainless steel boiler with a capacity greater than 1.5 liters and will provide at least 1-1.5 hours of uninterrupted steam: That is enough to clean the floors, bathroom and kitchen surfaces in an average home. Larger homes or businesses should consider a 3 or 4-liter model or one with automatic refilling and a reservoir tank
Good floor steam cleaners come equipped with a good selection of practical accessories to clean your whole home including small, hard-to-get-at crevices. Even the most powerful steam floor surface cleaner is not any good without the appropriate accessories. The process of steam cleaning involves the application of hot, dry steam to a surface. Heat loosens dirt, dissolves stains, and makes them easier to extract, but the steam emitted does not have the force of a pressure washer. Therefore, the operator has to scrub the surface with detailing tools such as a floor scrubber brush attached to the steam lance to dislodge and wipe off dirt. Ensure the model you choose has tools specifically designed to clean floors, walls, ceilings, glass, sinks, bathroom and kitchen. Some brush-nozzles will wear out over time, check that replacements are readily available and reasonably priced. A steam cleaner without replacement accessories is about as useful as a car without replacement tires.
The kind of features you would expect to see on all good floor steam cleaners include a pressure relief valve, a safety filler cap, a thermal dry boiler switch with water out a light alarm, and if all else should fail a thermal backup switch. If you might be using your steam cleaner on delicate surfaces, then a safety feature and good idea are to ensure your cleaner has an adjustable steam volume allows you to clean delicate surfaces confidently. Floor steam cleaners with a bottom located drain make for much easy cleaning of the boiler.